Academic Skills For Health Science - 1272 Words

University of Western Sydney – The College Academic Skills for Health Science Research project – part A (a literature review) Student: MINH NHUT TRIEU Student ID: 18758072 Date submitted: 16/04/16 Word counts: 1012 Nowadays, College students have been recognized at risk for the development of anxiety. According to nursing (2006), ‘anxiety is natural reactions to threatening situations. Your body has a fight or flight reaction—your heart races, you breathe faster, you sweat, and your stomach and head may ache’. Therefore, UWS College has provided students with many useful services such as counselling service, disability service, international student service, workshops and programs. Inam, Saqib and Alam (2003) believed that students experience anxiety and depression because of many reasons. Firstly, this is because the high volume of techniques to be absorbed and the requirement of academic performance. For example, the negative impacts of stress on medical students contain the weakness of functioning in laboratory performance and clinical exercise, stress-induced disorders and reducing performance. To solve this problem, learners should seek the advice of school counsellors. A research indicated that students who have been panic from the examination failure can manage pressure by improving their feelings of self-control. They can enhance those skills by having appropriate learning strategies, suitable self-instructions as well as relaxation time. In thisShow MoreRelatedmission vision Essay1074 Words   |  5 Pageshave been a nurse in the acute care setting for over 9 years and due to the changes in health care I have decided to pursue my professional goal in the part of a Family nurse practitioner; which will allow me provide advance nursing care. In order to achieve this goal, I have to advance my education, and Walden University has the capacity to provide me with information and skills required to achieving my academic goal of graduating with a degree in Family nurse practitioner. Walden University visionRead MoreSTEM Studies1033 Words   |  5 Pagesoccupations in science, technology, engineering, and mathematics. The subject matters for these occupations vary and include the following: social science, biological science, computer science, etc. General occupations in the STEM field include but aren’t limited to: practitioners, engineers, technicians, professors. Most careers in the STEM field require a bachelor’s degree as the minimum, but there are a few that accept a high school diploma or an associate’s degree (Landivar, 2013). Academic performanceRead MoreStatement of Purpose1037 Words   |  5 Pagesanalysis of cancer, a broad group of diseases that is a significant health problem in my country, Thailand. I hope that I may understand and identify causes of genetic diseases which contribute to making people in my country live happily and healthily. Toward such aspirations, I believe that a Master’s program in biology especially in cancer biology at Rensselaer Polytechnic Institute is bound to significantly enhance my academic level. My chosen program will enable me to fulfill my desire to expandRead MoreWinston Salem State University Is A Public Institution1553 Words   |  7 Pages and academic majors. Also, it is important to have academic support, understand the college’s demographic, and familiarize oneself with campus life. 2 Winston-Salem State University students can choose from more than 40 undergraduate majors to fit their strengths like computer science to sports, from visual arts, clinical lab science to elementary education and over 10 graduate programs for both masters and doctorate. Bachelor of Science degrees are offered in Clinical Laboratory Science, ExerciseRead MoreAcademic Statement Of Purpose Of The University s Health Services Organization And Policy972 Words   |  4 PagesAcademic Statement of Purpose Our department’s Health Services Organization and Policy (H.S.O.P.) Ph.D. Program looms large in my mind because I want a career in the research of operations research and decision science. Throughout my work and studies, I realized that we no longer live in a world where we can ignore the costs of treatment. I believe health economic evaluation and comparative effectiveness research can be the key to solving these problems. Obtaining my Ph.D. degree would a transformativeRead MoreQualities Of A True Leader1161 Words   |  5 Pages The concept of leadership has been widely discussed by academics worldwide and comprehensively defined in dictionaries and encyclopedias with multiple definitions and contexts. Scholars may study leadership from various perspectives, from a managerial standpoint, an in-depth philosophical analysis of the concept and even from the psychological aspect of the discipline. Since a very young age, I’ve had the opportunity to learn and being insp ired by multiple leaders, who provided me with a solid foundationRead MoreDescription Of A Nurse Anesthetist1291 Words   |  6 Pagesadminister and maintain anesthesia, oversee recovery, and follow up on patients. Being able to know how to correctly perform these duties is a requisite for supporting patients to health thus the need for high and vigorous education. In order to become a nurse anesthetist, CRNAs-to-be must earn their bachelor’s of science degree in nursing from an accredited nursing school. This typically takes four years. Then after obtaining this degree, graduates must gain their registered nursing license to workRead MoreBecoming A Medical Doctor While For Sciences861 Words   |  4 Pagesparticular occupation for which one is trained. As a teenager, I discovered that I have passion for helping people. When I got to college, I decided to pursue a career in one of the following fields; health sciences, sciences, and education. For health sciences, I chose t o become a medical doctor while for sciences, I chose to be an organic chemist and for education I decided to be a chemistry professor. Each of these careers is unique and has its educational requirements and targeted audience. With theRead MoreSt. Cloud University : A Public Higher Learning Institution989 Words   |  4 Pagesthe National Council for Accreditation of Teacher Education. Every department boasts specialized accreditation. For example, all College of Science and Engineering teaching programs are accredited by the National Council for Accreditation of Teacher Education (NCATE). The School of Computing, Engineering and Environment’s Bachelor of Sciences in Computer Science and Electrical Engineering are accredited by the Computing Accreditation Commission (CAC) of the Accreditation Board for Engineering and TechnologyRead MoreSensorimotor And Neurophysiological Basis Of Human Movement Studies1556 Words   |  7 Pagesan early career researcher in motor control (PhD completed 8 years ago). My work has been published in premier, peer-reviewed, international journals including the prestigious Proceedings of the Royal Society of London B (IF 5.68), Psychological Science (IF 4.54), Journal of Experimental Psychology: Human Perception Performance (IF 2.4), Journal of Physiology (IF 5.03), Acta Physiologica (IF 4.38), Journal of Neurophysiology (IF 3.30), Psychophysiology (IF 2.98), and Neuroscience (IF 3.23). I have

Relationships And Culture Of Early 19th Century America...

Long Essay: Relationships of Vulnerable Groups to the Identity and Culture of Early 19th-Century America and their Ramifications Back in the early 1800s, the United States of America had been a country associated with the promise of liberty, autonomy from tyrannical rule, and the unalienable rights specified in the formative Declaration of Independence - life, liberty, and the pursuit of happiness. As a consequence of the formation of the country and its promises, several diverse groups had flocked to the new world to enjoy new lives of prosperity, success, and guaranteed justice. Some of these groups, in particular, had been somewhat vulnerable during the time period, given the context of the simultaneous events, including various†¦show more content†¦In light of King George III’s tyrannical rule and consistent ignorance of colonists’ unalienable rights, the Americans had then decided that they would revamp such rule in favor of a libertarian nation separate from tyranny. Americans ubiquitously felt that they had become freer, although still not completely so, considering the pervasion of slavery, a major constriction of liberty and the rights of all citizens, as specified in the Declaration of Independence, to life, liberty, and the pursuit of happiness. In the nineteenth century, considerably after the Revolutionary War, the citizens began to set out to achieve their goals and fulfill their earnest passions and desires in the primes of their lifetimes. In this way, the movement of the collective American identity holds much in common with the European Enlightenment, whereupon the people had advanced their ways of life in aspects critical to prosperity and a generally positive bonding. It had not been solely the identity of the American people, but also their culture, which had related to the somewhat vulnerable groups of the time period. Post-Enlightenment, in the nineteenth century, the United States and its people had adapted t o the reform movements, developing a much higher-level, more advanced culture involved in such finer aspects of societal progress as literature, the numerous

Retail Sectors Oil and Gas

Question: Demonstrate the ability to analyse the factors affecting the present size and structure of the current oil and gas retail sectors and the impact of the rising price of oil. Answer: Introduction: Petroleum industry plays a very important role in the proper functioning of the economy. The UK retail market of the petroleum industry has about more the 200 companies that are into production, distribution, refining and marketing of the products. The filling stations selling fuels are covered under the retail market aspect. A major shakeout has taken place in the retail sector in the past twenty-five years, and this has led to the reduction in the filling stations from 18000 to 8591 by the end of the year 2014. There is competitiveness among the retail firms who only concentrate on the large volumes in the sites having shops and modern facilities. Factors affecting the current structure of the uks retail industry: The factors that are seen to affect the UKs retail industry are grouped under four crucial areas. The information is collected from the consumers, competitors, suppliers and government who affects the petrol filling business. Needs of Consumers: Price and convenience are the two important factors that a consumer considers while choosing PFS. By convenience, we mean the nearest location to the consumers. It is seen that a few customers are willing to travel to get fuel at a cheaper rate. The situation of the customers will lead to the extent to which the factors can have an influence on them (Andrews and Gateley, 2015). With more PFS availability, the focus of the consumers is seen to move towards price. A location gets more crucial for the customers when there are lesser options of PFS during their time of driving. A market survey conducted in UK in 2012, where about 1000 consumers over the age of sixteen have more focus on the price now than they had in the previous year. A question was also asked on the conveniences of filling fuel. The percentages of people agreeing to the statement that they look out for the convenient location to shopping for fuel rather than shopping around for lesser priced fuels w as low in 2012 (Van Vactor, 2010). This shows that the consumers mainly think about the price of the fuel, and they can take a step to search for cheaper oils in their nearest locations. The result when surveyed varied in Wales, East Anglia and Britain (Evans, 2007). A survey on the motorist in Ireland was conducted by the Consumer Council where the result showed that the 82 percentages respondents changed their driving behaviour due to the fuel price increase. They also said that they are always searching for the best price in fuel. The consumers also consider the other privileges that are offered by the PFS. These benefits are shopping, loyalty card offering and car wash facility. Bond with the fuel suppliers: Fuel to the PFS retailers are supplied by the fuel suppliers who are independent and oil company supply divisions (Falola and Genova, 2005). The relation with the suppliers if fuel is important it shows what prices the PFS retailers pay for the petroleum products. The price is paid in terms of Platts Plus. This means a global yardstick of prices is published daily for the petroleum product that is quoted in the terms of the US dollars. The charges that are taken extra by the suppliers of fuel over the quoted price are described as the plus element. Competition Levels: The consumers are getting more sensitive to prices even though the customers hold d some brand loyalty. Price competition is generally affected by the following factors: 1. The time and distance that is needed to arrive at the alternative PFS. 2. The size and the number of the PFS in a particular geographical area. 3. The various companies that operate the PFS in a particular geographical area. The reason for the increase in the competitive prices is due to the growth of the hypermarket in the petroleum retail market of UK. This has led to a fierce competition among the owners of PFS with the ones who are operating the hypermarkets. The PFS owners they need to face the hypermarkets basis retail prices (Giannakidis et al., n.d.). This has led to the gross margins to reduce. The gross margins have reduced, which is a percentage of the retail price over the fifteen years for the dealers who are independent. Regulations and Government policies: The business of the PFS is also affected by the government regulation and policies. It also helps in the investment and behavioural needs. The drivers related to the government can be classified into fiscal drivers, standards of safety and environmental policies and regulation. The fiscal drivers are the taxes like fuel duty, rates in business and corporation taxes that affects the business of PFS. The business rates are assessed on a five-year basis by the Valuation Office Agency. The assessment by the VOA is based on the performance of the PFS The final prices of retails accounts for 60 percentages of VAT and fuel duty. impact of rising oil prices on uks retail petroleum industry: The global economic performance is significantly dependent on the prices of fuel. There is a shift in the terms of trade, and also there is a transfer of income from the oil importing country to the oil exporting country (Aderoju, 2015). Oil prices increase in also affected by the increase in the prices of gas. The macroeconomic influence is affected with the rise in the prices of oil. Due to higher earnings from exports the oil exporting nations are facing a rise in the real income (Powering the UK The role of the power and gas sector in the wider economy, 2015). There is a negative impact on the importing countries of oil with the oil price increase. To keep their local economy running, they need more energy supplies. The increased oil prices have led to the increase in the production. This also caused the product prices to increase (PwC, 2015). Inflation happens to make the consumers life tougher around the world. The emerging economies are affected severely due to flat wages and the accelerated rate of spending. The national statistics of UK has shown the factory gate prices of UK increased to the highest levels during November 2009 due high oil prices. During this year, inflation rose for the month of November to January and value added tax was at 17.5 percentages during the month of February (Haerens, 2010) . The Bank of England predicted that pressures of inflation would occur more promptly. To stimulate the growth of the economy, the government reduced the value added taxes by 15 percentages. The rise in oil prices led to decrease in the exports of oil by the UK retail petroleum sector. The first quarter of 2010 saw an increase in the prices of oil from 80 dollars to 90 dollars. The major recessions in the countries like United States, United Kingdom and Europe is mainly due to the rises in the crude oil prices (Maugeri, 2006). Potential of technological change in the recent decade: The oil industrys future depends on the perpetual technological improvement. The international oil industries are also not in a position to accept the new technology. The 3D seismic mapping was used by the Exxon Company in the year 1967 for the exploration process. This was extremely dependent on the power of computing and cost reduction outside the industry. The seismic surveys were seen as a common practice in the United States and the Gulf of Mexico (McCage, 2007). There was a dramatic improvement in the productivity due to horizontal drilling. This drilling process was only due to the controllable steering from the surface and technology in evaluating the characteristic of a reservoir during the time of drilling. This technology can be beneficial for increasing the production of petroleum fuel. The technology of fracturing has also played a remarkable effect. This can be a potential technology in the future. The fracturing technology has a long history. It was experimented first by Amoco on reservoir basis. The Barnett shale with the help of the government support initiated the fracturing via horizontal wells. The slow adoption of technology may also result due to risk aversion on applying it to large projects (Nakaya, 2006) . The other factors that lead to slow penetration of technology were depletion of fields, economics and management practices of reservoirs. Before the application of any technology, a proper research and development are required. The small companies are seen to have a more aggressive approach. This was clear with the Mitchell Energy role in the development of hydro racking in shale gas. The government of the country should support development and research on the exploration of oil and gas of United Kingdom. As new exploration remains unsuccessful with the diffusion of new technology the budget for research has also lessened (Oilandgasinnovation.com, 2015). The immediate effect of this was the increase in the oil prices. The leading oil companies established their centres of research linked to their core business in an area with technical specialities (OFFSHORE OIL GAS SECTOR STRATEGY, 2015). In case of venture investment, a fraction of it is devoted to energy technology and among this hydro carbon related technology accounts for a small portion. Some money is also spent on the minerals and mining industry for supporting it. The mineral company that comes in mind is the Simbol Materials that produces lithium. The petroleum retailers can install the Smart Pos systems developed by petro soft that was designed to make the process of transaction more efficient. The features include electronic journal, drawers for cash with a drawl; the data can be accessed and processed online in the system. There is also demo for the first time users of the system. The qwickserve software by Petro soft is an innovative hardware technology used in the food services industry. These systems are also used in the UKs retail petroleum industrys food division. This helps in accuracy and a worthwhile experience for the retailers and the customers. The features that the software holds are self-services ordering, management of menu and recipe, customization of a menu, reporting, etc. The benefits the retailer is going to have after the installation is customer empowerment, increased up selling opportunities, expanding promotional opportunities, reduces errors due to entry of data, data entry time is reduced, improved menu pricing accuracy and helps increase in inventory. The C- store office feature of Petro soft will help in the management of inventory of the multi-store and single retail operators. The future proofing f the oil industry: Preparation is to be made by the industry to face the critical and uncertainties of the industry. More the 66 percentages of the company are seen to benefit from the oil field pilots that are digital, the improved performance and cost reduced the benefit. The security of people, the physical data is already seen to realise. Effective leadership, a good culture of business and adopting the right technologies such as cloud and wireless is required to future proof the digital oilfield technologies. The risks can be mitigated with management of the complex big data (Oil and Gas UK -the voice of the offshore industry, 2015). The functions in the oilfield are seen to achieve rapid advancement through the digital technologies. The work forces are better connected with the wireless systems. More than 75 percentages of the company are using this technology (study-of-the-uk-petroleum-retail-market, 2015). The workers working isolated areas are given mobile devices that have location-enabled fe atures. There is a clear case of adoption of digital technology in the oil fields in the remote of places. The organization that has adopted technological changes has experienced reduction in costs, better management process and smoother flow of information. There may arise a further investment of 360 million dollar in technologies related to the oil fields in the coming years. This is indicated by the projections in the industry. Conclusion: The UKs oil retail industry is seen booming in recent times. Due to the uncertainties in the global prices of oil, the oil industry will have some effect. If the industries adopt technology, the exploration of oil and gas becomes more convenient and comfortable. The factors that are affecting the structure of the industry must be analyzed in detail. As the needs of the consumers affect the sale of fuel so their decisions are to be taken into consideration by the retailers. Government policies and the tax structure of the country can also have a significant effect on the exploration oil. References Aderoju, A. (2015). TECHNOLOGICAL ADVANCEMENT IN THE OIL AND GAS INDUSTRY: A CONSIDERATION OF THE NODAL SEISMIC SYSTEM. Hamburg: Anchor Academic Publishing. Andrews, M. and Gateley, J. (2015). Savills UK | Oil and Gas. [online] Savills.co.uk. Available at: https://www.savills.co.uk/sectors/energy/oil-and-gas.aspx [Accessed 12 Aug. 2015]. Evans, R. (2007). Fueling our future. Cambridge: Cambridge University Press. Falola, T. and Genova, A. (2005). The politics of the global oil industry. Westport, Conn.: Praeger. Giannakidis, G., Labriet, M., OÃÅ'  GallachoÃÅ' ir, B. and Tosato, G. (n.d.). Informing energy and climate policies using energy systems models. Haerens, M. (2010). Oil. Farmington Hills, Mich.: Greenhaven Press/Gale, Cengage Learning. Maugeri, L. (2006). The age of oil. Westport, Conn.: Praeger Publishers. McCage, C. (2007). Oil. Detroit, MI: Greenhaven Press. Nakaya, A. (2006). Oil. Detroit .: Greenhaven Press. OFFSHORE OIL GAS SECTOR STRATEGY. (2015). 1st ed. [ebook] Available at: https://www.hse.gov.uk/offshore/offshore-oil-and-gas.pdf [Accessed 12 Aug. 2015]. Oil and Gas UK -the voice of the offshore industry. (2015). 1st ed. [ebook] Available at: https://www.oilandgasuk.co.uk/cmsfiles/modules/publications/pdfs/EC030.pdf [Accessed 12 Aug. 2015]. Oilandgasinnovation.com, (2015). Oil And Gas Innovation Center Oil Gas Innovation Center. [online] Available at: https://oilandgasinnovation.com/home/ [Accessed 12 Aug. 2015]. Powering the UK The role of the power and gas sector in the wider economy. (2015). 1st ed. [ebook] Available at: https://www.ey.com/Publication/vwLUAssets/Powering_the_UK/$FILE/Powering_the_UK.pdf [Accessed 12 Aug. 2015]. PwC, (2015). Gateway to growth: innovation in the oil and gas industry. [online] Available at: https://www.pwc.com/gx/en/oil-gas-energy/publications/gateway-to-growth-innovation-in-the-oil-and-gas-industry.jhtml [Accessed 12 Aug. 2015]. study-of-the-uk-petroleum-retail-market. (2015). 1st ed. [ebook] Available at: https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/69760/7322-study-of-the-uk-petroleum-retail-market.pdf [Accessed 12 Aug. 2015]. Van Vactor, S. (2010). Introduction to the global oil gas business. Tulsa, Okla.: PennWell Corp.

Polypropylene Fibers Essays - Building Materials,

Polypropylene Fibers According to major supplies, "Use of synthetic fibers for reinforcing concrete is continuously, increasing. The increase has been considerable since 1980, but slowed somewhat in 1990, a year of substantial construction cutbacks. Apparently the construction community believes there are advantages in the use of synthetic fibers in concrete." (Schupack) Synthetic fibers are used to improve crack control in concrete. Some reports say that synthetic fiber reinforced concrete (SFRC) would replace welded wire fabric in many slab-on-grade applications. But in reality if the welded wire fabric is placed properly it controls crack width better than the synthetic fiber reinforced concrete. In a case study of the use of synthetic fibers in reinforced concrete, the following conclusions were obtained. No matter what concrete placing job is being done, there is no substitute for good concrete practices. The use of a low fiber volume mix will help control plastic shrinkage cracks and bleeding, but not give good cracking control once the crack forms. The synthetic fibers running through a crack have a poor bond providing no shear friction. Impact and toughness tests on synthetic fiber reinforced concrete imply less edge spalling will occur. The American Concrete Institute (ACI) conducted two studies on polypropylene fiber reinforced concrete, one dealing with plastic shrinkage cracking and the other on permeability characteristics. Plastic shrinkage cracking occurs when the surface water on the concrete evaporates faster than the bleed water reaches the surface of the concrete. It was determined by the plastic shrinking cracking study that polypropylene fibers helped reduce the total plastic shrinkage crack area on test panels. Also determined is that the screeding rate affects the total crack area in polypropylene reinforced concrete, while finishing operations showed no significant effects. This study also suggests the use of longer fibers (about 0.75in.) will produce less crack area. "Permeability plays an important role in long-term durability of concrete materials. Permeability of concrete generally refers to the rate at which particular aggressive substances (water, sulfates, chloride ions, etc.) can flow through the concrete." (Soroushian) As discussed in the plastic shrinkage study that polypropylene fibers reduce cracking. Less cracking in the concrete surface that surface would be less permeable. In the permeability study, they concentrated on the effects of chloride and the permeability of the concrete. The results of this study concluded polypropylene fibers had little effects on chloride permeability of concrete. The polypropylene fibers only help reduce plastic shrinkage cracks. In residential construction, polypropylene fibers have been in use since the mid-to-late 1970s. Polypropylene fibers are used for their high tensile strength and low cost. These fibers fit into two categories, for early plastic shrinkage and for improved long-term crack control. One of the first residential applications of polypropylene fibers was in western Pennsylvania, in March of 1979. Fibers were used in all the flat work of the residence. Polypropylene fibers have gained acceptance by residential home builders due to its flexibility and its ability to conform to forms. Home builders say polypropylene fibers help them sell more concrete by reducing the potential risks of cracking. The use of polypropylene does not compensate for the lack of good design, water/cement ratios, temperature and wind conditions. One important thing to remember is nothing replaces good concrete practices. Bibliography Schupack, Morris, and William R. Stanley. "Seven Case Studies of Synthetic Fiber Reinforced Slabs." Concrete International Feb. 1992:50-56. Soroushian, Parviz., Faiz Mirza, and Abdulraman Alhozaimy. "Permeability Characteristics of Polypropylene Fiber Reinforced Concrete." ACI Materials Journal 92(1995):291-295. Mirza, Faiz., Parviz Soroushian, and Abdulraman Alhozaimy. "Plastic Shrinkage Cracking of Polypropylene Fiber Reinforced Concrete." ACI Materials Journal 92(1995):553-560. Biddle, Daniel T. "Fiber Reinforcement in Residential Concrete." Concrete International Feb. 1991:46-47.